Bose Panaray LT9402 III Mid/High 참조 매뉴얼 - 페이지 33

{카테고리_이름} Bose Panaray LT9402 III Mid/High에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Panaray LT9402 III Mid/High 40 페이지. Panaray lt series iii
Bose Panaray LT9402 III Mid/High에 대해서도 마찬가지입니다: 설치 매뉴얼 (32 페이지), 서비스 매뉴얼 (27 페이지)

페이지 인쇄

To Replace the V-2 Mid-frequency Driver in the Panaray

LT 9402

-III or LT 9702

1. Turn off the ampliﬁer power.

2. Disconnect the loudspeaker input connection(s).

3. The LT 4402-III, LT 9402-III and LT 9702-III use two V2 drivers. Remove the four screws securing each V2 driver to the

cabinet.

CAUTION: Be careful not to let the driver fall out of the cabinet.

4. Disconnect the following:

• For the top V2, disconnect the RED (+) and BLUE (-) wires connected to the driver.

• For the bottom V2, disconnect the BLACK (+) and BLUE (-) wires.

5. Replace the damaged V2 driver.

6. Make the following connections:

• For the top V2, connect the RED (+) and BLUE (-) wires connected to the driver.

• For the bottom V2, connect the BLUE (+) and BLACK (-) wires.

7. Secure each V2 driver to the cabinet with the four screws (on each V2).

8. Reconnect the input connections.

9. Turn on ampliﬁer power.

-III Loudspeakers

Service Information

LT 4402

-III,