Atlas Copco PHE50H Instructions de réparation - Page 4
Parcourez en ligne ou téléchargez le pdf Instructions de réparation pour {nom_de_la_catégorie} Atlas Copco PHE50H. Atlas Copco PHE50H 15 pages.
Imprimer la page
1
Detaching the
Loosen two screws (2) and then the four
gear box cover
screws (5) and detach the complete mo-
tor (1) with the gear box cover (3) and the
gasket (4).
2
Remove the complete motor (1) by hitting
the gear box cover (3) or the armature pin-
ion with a plastic hammer.
3
Lift off the respective brush springs (6)
from the carbon brushes and place them
on the top edge of the brush holders.
1
Detaching the
Pull off the respective cable lugs (5) and
armature
remove the carbon brushes (4).
2
Pull the complete armature (9) from the
motor housing (D).
3
Pull the O-ring (C), the rubber sleeve (6)
and the bearing ring (B) from the arma-
ture (9).
4
Press off the ball bearings (A) and (7) with
aid of the forcing disks (service tool).
5
Remove the seal ring (8).
6
Loosen the screws (3) and (E) and detach
the brush holders (1) and (2).
Repair Instructions No.184.11/98
6
B
A
9
8
7
5
6
4
3 2
1
PHE 50 H
5
4
3
2
1
C
D
E
PAGE
3
5
6