Atlas Copco PHE50H Instructions de réparation - Page 7
Parcourez en ligne ou téléchargez le pdf Instructions de réparation pour {nom_de_la_catégorie} Atlas Copco PHE50H. Atlas Copco PHE50H 15 pages.
Imprimer la page
1
Detaching the
Undo the two screws (F) and remove the
bevel wheel
anti-vibration plate spring (E).
2
Undo the five screws (7) together with
their washers and remove the flange (6)
from the gear box (D).
3
Undo the four nuts (9), remove the wash-
ers and detach the cover (A) as well as the
gasket (B).
Remove the felt ring (C).
4
Take off the O-rings (1) and (2) as well as
both pins (3).
5
Take a plastic hammer and knock against
the opening of the gear box (D). This will
undo the bevel wheel (4) and the ball
bearing (5).
6
Remove the O-ring (8).
1
Detaching the
Remove the O-Ring (1) from the pis-
connecting rod
ton (2).
2
Push the bolt (3) from the piston (2) and
pull out the connecting rod (5).
3
Press the needle bearing (4) from the con-
necting rod.
Repair Instructions No.184.11/98
7
6
5
4
1
PHE 50 H
8
A
1
3
2
F
4
3
5
2
PAGE
6
9
B
C
12
D
E
13