Bose Aviation Headset X Manuel du propriétaire - Page 27

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bose Aviation Headset X. Bose Aviation Headset X 36 pages. Owner's guide
Également pour Bose Aviation Headset X : Manuel du propriétaire (36 pages), Manuel d'installation rapide (1 pages), Manuel du propriétaire (16 pages), Manuel du propriétaire (36 pages)

Figure 21

Pulling the ear cushion skirt

away from the earcup

Headband cushion

1. Remove the cushion as described in "Headband cushion

replacement" on page 29.

2. Place the cushion in a solution of water and a mild detergent.

3. Allow the cushion to air dry, then, reattach.

If the protective inner screen becomes damp, due to environmental

moisture such as light rain, dew, perspiration, or condensation, allow

it to air dry only. Do not use electric heaters, blowers, or hairdryer

type devices to dry the inner screen.

If the headset is immersed in liquid, do not use it. Contact the Bose

Aviation Headset Department for assistance.

Through normal use, parts like windscreens and ear cushions may

require periodic replacement.

1. Remove the band that secures the windscreen by rolling the

band from the tip of the microphone.

2. Gently pull the windscreen off of the microphone.

3. Slide-on the replacement windscreen and make sure that it fits

completely over the microphone.

4. Roll a new band to the proper position, about

end of the windscreen, to secure it.

1. Grasp the ear cushion skirt where it folds into the slot on the

earcup (Figure 21).

2. Gently pull the ear cushion skirt up and away from the earcup.

EADSET

ARE AND

inch from the

AINTENANCE