Bose Aviation Headset X Посібник користувача - Сторінка 27
Переглянути онлайн або завантажити pdf Посібник користувача для Гарнітури Bose Aviation Headset X. Bose Aviation Headset X 36 сторінок. Owner's guide
Також для Bose Aviation Headset X: Посібник користувача (36 сторінок), Посібник з швидкого налаштування (1 сторінок), Посібник користувача (16 сторінок), Посібник користувача (36 сторінок)
Replacing parts
Figure 21
Pulling the ear cushion skirt
away from the earcup
Headband cushion
1. Remove the cushion as described in "Headband cushion
replacement" on page 29.
2. Place the cushion in a solution of water and a mild detergent.
3. Allow the cushion to air dry, then, reattach.
Removing environmental moisture
If the protective inner screen becomes damp, due to environmental
moisture such as light rain, dew, perspiration, or condensation, allow
it to air dry only. Do not use electric heaters, blowers, or hairdryer
type devices to dry the inner screen.
If the headset is immersed in liquid, do not use it. Contact the Bose
Aviation Headset Department for assistance.
Through normal use, parts like windscreens and ear cushions may
require periodic replacement.
Microphone windscreen replacement
1. Remove the band that secures the windscreen by rolling the
band from the tip of the microphone.
2. Gently pull the windscreen off of the microphone.
3. Slide-on the replacement windscreen and make sure that it fits
completely over the microphone.
4. Roll a new band to the proper position, about
end of the windscreen, to secure it.
Ear cushion replacement
1. Grasp the ear cushion skirt where it folds into the slot on the
earcup (Figure 21).
2. Gently pull the ear cushion skirt up and away from the earcup.
H
C
EADSET
ARE AND
1
/
inch from the
4
M
AINTENANCE
®
27