Eleiko 3080001 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Eleiko 3080001. Eleiko 3080001 5 pages. Adjustable bench

read before installation and use

caution

The equipment must be installed and used in a place whose access and supervision are

specifically controlled by the owner.

Be sure to install the equipment on a stable base and properly level the equipment.

ELEIKO recommends that all equipment is secured to floor and installed by a licensed

contractor or an ELEIKO-installer.

SAFETY INSTRUCTIONS

It is the responibility of the purchaser of ELEIKO products to instruct all users and

supervising personnel on proper usage of the equipment.

1. All included warnings (labels) and instructions MUST be read before the use of any

ELEIKO-equipment. Use each equipment as it is intended for.

2. A user MUST get a medical examination and proper instructions before the use of

any ELEIKO-equipment.

3. DO NOT let anyone, under any cuircumstances, use equipment that appears to be

damaged. Do not try to repair any equipment before consulting an ELEIKO technician.

4. DO NOT replace the components of ELEIKO-equipment with other none ELEIKO-

equipment (magnetic safety pin, frames, bars), do not improvise. If there are any doubts

consult an ELEIKO representative prior to any intervention.

5. DO NOT overload the equipment and DO NOT try to exceed personal strength levels.

6. Keep children under the age of 14 away from the equipment and teenagers must be

supervised.

7. DO NOT remove any safety labels from the ELEIKO-equipment. ELEIKO is not

responsible if a label is removed. Replace damaged labels immediately.

PREVENTITIVE MAINTENANCE & INSPECTIONS

WEEKLY:

Clean the surfaces on frames and tubes from dust and dirt.

Check that all bolts between parts, walls, floors are properly tightened, according to

recommendations.

WARRANTY

All products manufactured by ELEIKO Inc. are warranted to the original purchaser to be

free from defects in workmanship and / or materials under normal use as follows:

5 years on welds on structural frame (NOT on moving parts)

This equipment is for indoor use only.