Eleiko 3080001 Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Kebugaran Eleiko 3080001. Eleiko 3080001 5 halaman. Adjustable bench
read before installation and use
caution
The equipment must be installed and used in a place whose access and supervision are
specifically controlled by the owner.
Be sure to install the equipment on a stable base and properly level the equipment.
ELEIKO recommends that all equipment is secured to floor and installed by a licensed
contractor or an ELEIKO-installer.
SAFETY INSTRUCTIONS
It is the responibility of the purchaser of ELEIKO products to instruct all users and
supervising personnel on proper usage of the equipment.
1. All included warnings (labels) and instructions MUST be read before the use of any
ELEIKO-equipment. Use each equipment as it is intended for.
2. A user MUST get a medical examination and proper instructions before the use of
any ELEIKO-equipment.
3. DO NOT let anyone, under any cuircumstances, use equipment that appears to be
damaged. Do not try to repair any equipment before consulting an ELEIKO technician.
4. DO NOT replace the components of ELEIKO-equipment with other none ELEIKO-
equipment (magnetic safety pin, frames, bars), do not improvise. If there are any doubts
consult an ELEIKO representative prior to any intervention.
5. DO NOT overload the equipment and DO NOT try to exceed personal strength levels.
6. Keep children under the age of 14 away from the equipment and teenagers must be
supervised.
7. DO NOT remove any safety labels from the ELEIKO-equipment. ELEIKO is not
responsible if a label is removed. Replace damaged labels immediately.
PREVENTITIVE MAINTENANCE & INSPECTIONS
WEEKLY:
Clean the surfaces on frames and tubes from dust and dirt.
Check that all bolts between parts, walls, floors are properly tightened, according to
recommendations.
WARRANTY
All products manufactured by ELEIKO Inc. are warranted to the original purchaser to be
free from defects in workmanship and / or materials under normal use as follows:
5 years on welds on structural frame (NOT on moving parts)
additionaL information
This equipment is for indoor use only.