Anker 555 Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Anker 555. Anker 555 13 pages. Power station
Imprimer la page
LCD Screen Guide
LCD Screen Button
Press the button to turn on the LCD screen.
Power Saving Mode
High-Temperature Alert
• When this icon shows, stop using the product and leave it to cool down until the icon disappears.
Low-Temperature Alert
• When this icon shows, stop using the product until the icon disappears.
USB-C Output/ Input Port
USB-A Output Port
Car Charging
AC Charging and Voltage Frequency
Press the AC output port on/off button for 2 seconds to switch the frequency.
Remaining Battery
Time to Recharge / Remaining Battery in Hours
Current Input Power
Current Output Power
05
Trouble Shooting
AC charging failure
If AC charging is unavailable, it's possible that the connected devices exceed 1000W. Try unplugging one or more
of the connected devices to see if this resolves the issue.
Resetting your Power Station
If your power station isn't working correctly, insert a paper clip or pin into the reset hole for 1 second for a
factory reset. If the Power Station still doesn't work, please contact [email protected].
Reset
FAQ
Q1: Why does the power station's battery drain even when no devices are connected?
When the AC or Car Socket control button is turned on, even if no devices are being charged, there will still be a
certain amount of no-load power consumption. To avoid this, make sure the AC and Car Socket charging buttons
are off or turn on the power saving mode when you're not using the Power Station.
Q2: What's the max power output of the AC output ports?
The AC output ports can deliver a maximum of 1000W to connected devices.
Q3: Can I recharge the product while charging connected devices?
Yes.
Q4: Can this product power a CPAP machine?
Yes, but make sure to turn off the power saving mode first.
Q5: What kind of solar charger can charge this product?
Any 11-28V solar charger with an DC7909 connector.
06