Anker 555 사용자 설명서 - 페이지 5

{카테고리_이름} Anker 555에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anker 555 13 페이지. Power station

LCD Screen Guide

LCD Screen Button

Press the button to turn on the LCD screen.

Power Saving Mode

High-Temperature Alert

• When this icon shows, stop using the product and leave it to cool down until the icon disappears.

Low-Temperature Alert

• When this icon shows, stop using the product until the icon disappears.

USB-C Output/ Input Port

USB-A Output Port

Car Charging

AC Charging and Voltage Frequency

Press the AC output port on/off button for 2 seconds to switch the frequency.

Remaining Battery

Time to Recharge / Remaining Battery in Hours

Current Input Power

Current Output Power

Trouble Shooting

AC charging failure

If AC charging is unavailable, it's possible that the connected devices exceed 1000W. Try unplugging one or more

of the connected devices to see if this resolves the issue.

Resetting your Power Station

If your power station isn't working correctly, insert a paper clip or pin into the reset hole for 1 second for a

factory reset. If the Power Station still doesn't work, please contact [email protected].

Reset

FAQ

Q1: Why does the power station's battery drain even when no devices are connected?

When the AC or Car Socket control button is turned on, even if no devices are being charged, there will still be a

certain amount of no-load power consumption. To avoid this, make sure the AC and Car Socket charging buttons

are off or turn on the power saving mode when you're not using the Power Station.

Q2: What's the max power output of the AC output ports?

The AC output ports can deliver a maximum of 1000W to connected devices.

Q3: Can I recharge the product while charging connected devices?

Yes.

Q4: Can this product power a CPAP machine?

Yes, but make sure to turn off the power saving mode first.

Q5: What kind of solar charger can charge this product?

Any 11-28V solar charger with an DC7909 connector.