anko FW-45M Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko FW-45M. anko FW-45M 12 pages. Tripod fan

3 Assembly

Your Fan has been boxed unassembled to minimise packaging waste. Each part is

designed to fit together and be disassembled easily for cleaning or storage.

First, lay the Tripod Hub assembly on the floor.

•

Remove the three Nut and Bolts.

•

Tip up so that the underneath of the base is facing the ceiling.

•

Take one of the legs and slide it into the Tripod hub. Take note of the orientation of

the leg end. The chamfered edge must be on top as shown.

•

Line up the holes and fit the bolt all the way through.

Fit the nut to the protruding end of the bolt and using a spanner and Philips head

•

screw driver, tighten the nut.

Repeat for the other two legs.

•

To open out the legs, grasp a leg whilst holding the hub

firmly and swing the leg out until it locks in place.

CAUTION: Take care not to pinch your hand or any other

object in the hinged components.

Keep children away whilst opening the legs.

Page 6 of 12