anko FW-45M Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kipas angin anko FW-45M. anko FW-45M 12 halaman. Tripod fan

anko FW-45M Panduan Pengguna

3 Assembly

3.1 Tripod

Your Fan has been boxed unassembled to minimise packaging waste. Each part is
designed to fit together and be disassembled easily for cleaning or storage.
First, lay the Tripod Hub assembly on the floor.
Remove the three Nut and Bolts.
Tip up so that the underneath of the base is facing the ceiling.
Take one of the legs and slide it into the Tripod hub. Take note of the orientation of
the leg end. The chamfered edge must be on top as shown.
Line up the holes and fit the bolt all the way through.
Fit the nut to the protruding end of the bolt and using a spanner and Philips head
screw driver, tighten the nut.
Repeat for the other two legs.
To open out the legs, grasp a leg whilst holding the hub
firmly and swing the leg out until it locks in place.
CAUTION: Take care not to pinch your hand or any other
object in the hinged components.
Keep children away whilst opening the legs.
1
4
Page 6 of 12
2
3
5