Dry-Lam 27" Manuel d'instruction - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Dry-Lam 27". Dry-Lam 27" 15 pages. School & office laminators
Imprimer la page
Dry-Lam Laminators, with variable speed and reverse are reliable,
easy-to-use professional laminators designed to laminate a variety of
materials using up to 25",or 27" laminating film. All models are capable
of lamination from 1 to 9 feet per minute and can be reversed by the push
of a button.
P
N
M
H
H
E
G L
Tension Adjusting Knobs (A) are conveniently located on the Supply Mandrels (B) on the right
side panel for easy access. A Control Panel (C) is located on the Left Housing (D), and is equipped
with a Power Button (E) to turn the machine on, Temperature Up (F) and Temperature Down (G)
buttons, two Preset buttons (H), a Motor Start button (I) to start the motor turning, Speed Up (J)
and Speed Down (K) buttons to adjust the speed as necessary, a Motor Stop/Reverse button (L),
a User Preset button (M) to save your own settings, and a Count Reset button (N) which resets
the usage counter. The Display button (O) toggles the Display (P) between 3 settings. The Feedtray
(Q) and Feed Guide (R) provide a smooth, durable paper path and the Heat Guard (S) protects
hands from hot surfaces inside. Teflon coated Heat Shoes (T) minimize friction. The Cutter (U)
cuts and trims your laminated documents and the Keyswitch (V) prevents unauthorized usage.
1
O
F
I
J
K
B. Specific Troubleshooting Guide
V
Wrinkles on film (side to side)
Wrinkles on film (lengthwise)
Plastic not bonding
Bubbles or Blisters
Impressions on product
Squeaking sounds
Film narrowing on shoes
Film wrinkling on shoes
Continuous blemish
Cloudy film
"Orange Peel" finish
Film sticks to rollers
Film sticks to shoes
Film won't stay aligned
No seal on edges
Poor seal - one side only
C. Removing a "Wrap-Around"
A "wrap-around" occurs if the film exiting the
rear rollers curls around one of them causing
the laminate to wind around the roller.
If the wrap-around is not severe, simply use
the reverse feature and back the film out.
Make sure to remove the Feed Table
before reversing the machine!
For extreme wrap-arounds (i.e. when plastic
and/or product have wrapped around the
rubber rollers several times) follow this proce-
dure:
18