Dry-Lam 27" Instruction Manual - Page 6

Browse online or download pdf Instruction Manual for Laminator Dry-Lam 27". Dry-Lam 27" 15 pages. School & office laminators

Print Page

Dry-Lam Laminators, with variable speed and reverse are reliable,

easy-to-use professional laminators designed to laminate a variety of

materials using up to 25",or 27" laminating film. All models are capable

of lamination from 1 to 9 feet per minute and can be reversed by the push

of a button.

G L

Tension Adjusting Knobs (A) are conveniently located on the Supply Mandrels (B) on the right

side panel for easy access. A Control Panel (C) is located on the Left Housing (D), and is equipped

with a Power Button (E) to turn the machine on, Temperature Up (F) and Temperature Down (G)

buttons, two Preset buttons (H), a Motor Start button (I) to start the motor turning, Speed Up (J)

and Speed Down (K) buttons to adjust the speed as necessary, a Motor Stop/Reverse button (L),

a User Preset button (M) to save your own settings, and a Count Reset button (N) which resets

the usage counter. The Display button (O) toggles the Display (P) between 3 settings. The Feedtray

(Q) and Feed Guide (R) provide a smooth, durable paper path and the Heat Guard (S) protects

hands from hot surfaces inside. Teflon coated Heat Shoes (T) minimize friction. The Cutter (U)

cuts and trims your laminated documents and the Keyswitch (V) prevents unauthorized usage.

B. Specific Troubleshooting Guide

Wrinkles on film (side to side)

Wrinkles on film (lengthwise)

Plastic not bonding

Bubbles or Blisters

Impressions on product

Squeaking sounds

Film narrowing on shoes

Film wrinkling on shoes

Continuous blemish

Cloudy film

"Orange Peel" finish

Film sticks to rollers

Film sticks to shoes

Film won't stay aligned

No seal on edges

Poor seal - one side only

C. Removing a "Wrap-Around"

A "wrap-around" occurs if the film exiting the

rear rollers curls around one of them causing

the laminate to wind around the roller.

If the wrap-around is not severe, simply use

the reverse feature and back the film out.

Make sure to remove the Feed Table

before reversing the machine!

For extreme wrap-arounds (i.e. when plastic

and/or product have wrapped around the

rubber rollers several times) follow this proce-

dure: