Anova Elevation ELV52R Instructions de montage - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} Anova Elevation ELV52R. Anova Elevation ELV52R 2 pages.
Imprimer la page
3.
Locate four table legs and four glides.
4.
Insert a glide into the threaded hole at the bottom of a
table leg.
Repeat this step for the remaining table legs.
5.
Locate the table top, twelve 3/8" Flat Washers, twelve
3/8"-16 Nylon Locknuts, and four Table Legs.
6.
Place a table leg against the table frame by sliding the leg
onto the three protruding bolts.
7.
Place a 3/8" Flat Washer on each of the three threaded
bolts now protruding through the Table Leg.
8.
Place a 3/8"-16 Nylon Locknut on each of the three
threaded bolts now protruding through the flat washers.
Tighten with a 9/16" open end or box end wrench.
9.
Repeat steps 6-8 for each table leg.
Note: Please contact Customer Care at 1-866-797-1761 when ordering replacement parts.
Table Leg
3/8"-16
Nylon Locknut
3/8" Flat
Washer
Bolt
10/30/2019
Copyright 2019 ANOVA®
Table Leg
Manufactured in the U.S.
Glide
2