Anova Elevation ELV52R 조립 지침 - 페이지 2

{카테고리_이름} Anova Elevation ELV52R에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Anova Elevation ELV52R 2 페이지.

Locate four table legs and four glides.

Insert a glide into the threaded hole at the bottom of a

table leg.

Repeat this step for the remaining table legs.

Locate the table top, twelve 3/8" Flat Washers, twelve

3/8"-16 Nylon Locknuts, and four Table Legs.

Place a table leg against the table frame by sliding the leg

onto the three protruding bolts.

Place a 3/8" Flat Washer on each of the three threaded

bolts now protruding through the Table Leg.

Place a 3/8"-16 Nylon Locknut on each of the three

threaded bolts now protruding through the flat washers.

Tighten with a 9/16" open end or box end wrench.

Repeat steps 6-8 for each table leg.

Note: Please contact Customer Care at 1-866-797-1761 when ordering replacement parts.

Table Leg

3/8"-16

Nylon Locknut

3/8" Flat

Washer

Bolt

10/30/2019

Table Leg

Manufactured in the U.S.

Glide