Airthings 2820 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Airthings 2820. Airthings 2820 15 pages. Radon and indoor air quality system for multi-room, connected monitoring

Imprimer la page

STEP 6

Add devices and link to Hub

Now, remove the plastic battery tab on each of your Airthings devices. To add the devices to

your account, use the

needed. Once the device is added accept invite to link. Linking can also be done using the

icon on the app device overview.

Depending on the firmware version of your Wave devices, the devices might need to go

through a firmware update as part of the Hub configuration.

STEP 7

Congratulations!

After linking of a Wave family device is complete, the device will start searching for a Hub and

connect to any of your Hubs.

This process typically takes between 15 minutes to 1 hour for full connectivity to the Hub.

Once your devices are connected to the Hub, the device overview screen in your app will

show a signal strength indicator next to each device, instead of the Bluetooth icon. This

shows that your device is connected to the Hub and as long as there is one bar, the

connection is working.