Airthings 2820 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Airthings 2820. Airthings 2820 15 pages. Radon and indoor air quality system for multi-room, connected monitoring
Imprimer la pageTroubleshooting
Problem
I can't find my Hub when adding it
I don't see my Wave device when linking it
to a Hub
I don't want my Wave device to be
connected to a Hub any more
Resolution
Bluetooth must be enabled on your
smartphone. For Android, GPS location
must be enabled for Bluetooth low energy
to function properly.
You are not close enough to the Hub or
there is wireless interference. Keep your
phone less than 1m / 3 ft away from the Hub
and search for Hub again.
The Hub is already registered to another
account. Therefore, it does not advertise its
existence.
Disconnect power and Ethernet cables from
Hub, then connect only power cable and
search for Hub again.
When Hub is added, connect Ethernet cable
again.
Exit the "add device" screen and re-enter to
try again.
Bluetooth must be enabled on your
smartphone. For Android, GPS location
must be enabled for Bluetooth low energy
to function properly.
You are not close enough to the Wave
device or there is wireless interference.
Keep your phone less than 1m / 3ft away
from the Wave device and search for device
again.
If the device was already connected to a
Hub, Bluetooth will not turn back on again.
Exit the "Link device" screen and re-enter to
retry.
Go to the Device Settings page of the Wave
device and select Unlink.
Follow the instructions in app.