Absolute Acoustics HDBASET NDS-571HD-TX Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Absolute Acoustics HDBASET NDS-571HD-TX. Absolute Acoustics HDBASET NDS-571HD-TX 8 pages.

Imprimer la page

Installation Instructions

QUICK SETUP GUIDE

Begin with the NDS-570HD units and all external devices

turned o and with power cables removed.

Place the NDS-571HD-TX and NDS-572HD-RX units at the

installation site, respecting the minimum spaces for ventilation.

Connect the source device to the input port of the NDS

-571HD-TX unit, and the HDMI display to the HDMI output port of

the NDS-572HD-RX unit.

Connect the HDBaseT™ link cable between the TX and RX unit,

using a quality twisted pair cable.

[Optional] Connect the control system IR and RS232 ports to

the matching ports of NDS-570HD units.

Connect power to the NDS-571HD-TX or NDS-572HD-RX unit.

The other unit will be feed by Power over Cable technology.

Connect external devices to the power supply and turn they on.

Perform usability tests and validate the installation.

ABOUT HDBASET™ CABLING

Sending HDMI signals (specially at 4K/UHD resolutions) through HDBaseT™ technology is highly sensitive to the quality of cabling and

installation techniques. Thus, we strongly recommend the use of solid conductors CAT6 twisted-pair cables (or higher). The

transmission distances for each kind of cable are listed in the table below.

Cable Type

CAT5e/6

CAT6a/7

Note: The distances in the table above are consistent with ideal installation

conditions. In a real application, the transmission distances may vary due to

installation conditions. Always work with a safety factor.

For termination, the 568B standard is recommended use the appropriate connector

with its matching cable.

www.absoluteacoustics.com

Resolution

1080p

4K/UHD

1080p

4K/UHD

NDS-570HD

Warning

All devices should be unplugged from

electrical supply prior to begin the

installation. Damages caused due to misuse

are not covered by the product warranty.

Tip

Before permanently securing the unit for

nal installation, test for proper operation

of the unit and cables in your system.

Distance

197ft (60m)

115ft (35m)

230ft (70m)

130ft (40m)

EIA / TIA-568B