Absolute Acoustics HDBASET NDS-571HD-TX 설치 매뉴얼 - 페이지 5
{카테고리_이름} Absolute Acoustics HDBASET NDS-571HD-TX에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Absolute Acoustics HDBASET NDS-571HD-TX 8 페이지.
페이지 인쇄Installation Instructions
QUICK SETUP GUIDE
1.
Begin with the NDS-570HD units and all external devices
turned o and with power cables removed.
2.
Place the NDS-571HD-TX and NDS-572HD-RX units at the
installation site, respecting the minimum spaces for ventilation.
3.
Connect the source device to the input port of the NDS
-571HD-TX unit, and the HDMI display to the HDMI output port of
the NDS-572HD-RX unit.
4.
Connect the HDBaseT™ link cable between the TX and RX unit,
using a quality twisted pair cable.
5.
[Optional] Connect the control system IR and RS232 ports to
the matching ports of NDS-570HD units.
6.
Connect power to the NDS-571HD-TX or NDS-572HD-RX unit.
The other unit will be feed by Power over Cable technology.
7.
Connect external devices to the power supply and turn they on.
8.
Perform usability tests and validate the installation.
ABOUT HDBASET™ CABLING
Sending HDMI signals (specially at 4K/UHD resolutions) through HDBaseT™ technology is highly sensitive to the quality of cabling and
installation techniques. Thus, we strongly recommend the use of solid conductors CAT6 twisted-pair cables (or higher). The
transmission distances for each kind of cable are listed in the table below.
Cable Type
CAT5e/6
CAT6a/7
Note: The distances in the table above are consistent with ideal installation
conditions. In a real application, the transmission distances may vary due to
installation conditions. Always work with a safety factor.
For termination, the 568B standard is recommended use the appropriate connector
with its matching cable.
www.absoluteacoustics.com
Resolution
1080p
4K/UHD
1080p
4K/UHD
NDS-570HD
Warning
All devices should be unplugged from
electrical supply prior to begin the
installation. Damages caused due to misuse
are not covered by the product warranty.
Tip
Before permanently securing the unit for
nal installation, test for proper operation
of the unit and cables in your system.
Distance
197ft (60m)
115ft (35m)
230ft (70m)
130ft (40m)
EIA / TIA-568B
1
8
04