DSC PC51O Manuel d'instruction - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} DSC PC51O. DSC PC51O 16 pages. Pc51o
Également pour DSC PC51O : Manuel d'installation (20 pages)
Imprimer la pageTESTING
Bell Test
Entering this command will sound the siren and turn ON all the keypad lights for 2 seconds. To perform a
∗
bell test, enter [
][4] on the keypad.
Weekly Testing
It is recommended that you test your system weekly.
1 Disarm the system and ensure that the "Ready" light is ON.
2 Perform a Bell Test by entering [
on the keypad will come ON.
3 Activate each sensor on your system in turn. For example, open protected doors and windows, and
walk in areas protected by motion detectors. Each Zone Light should come ON when each zone is
activated. Each Zone Light will be shut OFF when the zone is restored to normal (when the door or
window is shut, or when motion stops in areas protected by motion detectors).
4 If they are programmed for operation, press the [F], [A], and [P] keys in turn. The [F] key will sound the
bell or siren in a pulsed mode. Enter an Access Code to silence the alarm. The [A] key is a silent
alarm. After pressing the [A] key, enter an Access Code to cancel the alarm. The [P] key may be
programmed as silent or audible. After pressing the [P] key, enter an Access Code to cancel the
alarm.
5 Should the system fail to operate properly, call your alarm dealer for service.
∗
][4]. The bell or siren will sound for 2 seconds and all of the lights
11