DSC PowerSeries Fiche de synthèse du produit - Page 18
Parcourez en ligne ou téléchargez le pdf Fiche de synthèse du produit pour {nom_de_la_catégorie} DSC PowerSeries. DSC PowerSeries 20 pages. Telephone interface & automation control module
Également pour DSC PowerSeries : Manuel de l'utilisateur (20 pages)
Imprimer la page
Power 832 Application Notes – X-10 Automation (Output Control)
Application:
The ESCORT can be used to control up to 32 X-10 automation devices. This Application
Note will cover the basic programming required for output control, specifically to turn a
light on when an alarm occurs. Additional Application Notes are available for scheduling
and manual control.
Equipment:
-
Power 832 control panel
-
ESCORT 5580 module
-
X-10 controller (PL-513 or PSC-04)
-
X-10 light module
Special Notes:
Program Sections:
Procedure:
To enter ESCORT programming, perform the following on any local touch tone phone:
-
Enter [*] [*] [*] on any local touch tone phone to turn the ESCORT on
-
Enter [*] [8] [ESCORT Service Code] – default is [5580]
For information regarding how the ESCORT is programmed, please refer to the ESCORT 5580 Installation
Manual.
Step 1 – First System Options – ESCORT Section [002]
•
Turn Option [03] ON to enable Home Automation.
•
An access can be required to enter the [*] [5] Automation for additional security. If Option [04] is ON,
an access code is required. If Option [04] is OFF, an access code is not required.
Step 2 – Number of Automation Transmissions – ESCORT Section [007]
The number of Automation transmissions can be changed to increase reliability. Since the Automation
transmissions are non-confirmed and occur over the existing AC wiring of the premises, having the
ESCORT transmit multiple On/Off commands can increase reliability.
•
Program the number of on/off transmissions to be sent for each command.
•
Note, each transmission takes approximately one second. The larger the number, the slower the
Automation system will appear to operate.
ESCORT Section [002]
ESCORT Section [007]
ESCORT Section [130]
ESCORT Section [131]
ESCORT Section [134]
ESCORT Section [401]
- First System Options
- Number of Automation Transmissions
- Item #01 House Code & Unit Number
- Item #01 Miscellaneous Options
- Item #01 Schedule/Output Condition
- Item #01 Output Follower