DAITEM SH423AX Manuel d'installation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DAITEM SH423AX. DAITEM SH423AX 13 pages. Siren external
Imprimer la page4.2 Setting the sounding parameters
4.2.1 Duration of alarm sounding
To modify the duration of sounding, enter:
siren n°
Factory setting: 90 s
4.3 Type of sounding
To modify the type of siren sounding, enter:
siren n°
Factory setting: external
4.4 Sound level of disarm and arm command indications
For greater user-friendliness, the sound level can be increased or decreased. To do this, enter:
siren n°
Factory setting: 4 = average
4.5 Transfer of arm and disarm commands
To modify the transfer of indications, enter:
siren n°
Factory setting: 0
4.6 Indication of audible signals and door bell
This function is factory-set to be disabled. It can be activated if required. To do this, enter:
siren n°
Factory setting: 0
4.7 Validation of radio link in installation mode
This function is used to validate the radio link test in installation mode on 1 of the 2 radio bands.
To switch to 2 bands, enter:
siren n°
Factory setting: 0
4.8 Triggering upon intrusion
The alarm is factory-set to be triggered as soon as an intrusion is detected. This function can be deactivated or activated for
intrusion confirmed indications only. To do this, enter:
siren n°
Factory setting: 1
from 20 to 180 s
0: internal
1: external
from 1 to 8
0: disabled
1: sounding
3: sounding and flashing
5: flashing
0: disabled
1: sounding
0: validation on 1 of the 2 bands
1: validation on 2 bands
0: disabled
1: single or confirmed intrusion
2: confirmed intrusion only
4.2.2 Level of sounding
To modify the level of sounding, enter:
siren n°
Factory setting: 0
4
0: normal
1: quiet