DAITEM SH423AX Kurulum Kılavuzu - Sayfa 4
Güvenlik Sistemi DAITEM SH423AX için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DAITEM SH423AX 13 sayfaları. Siren external
Sayfayı Yazdır4.2 Setting the sounding parameters
4.2.1 Duration of alarm sounding
To modify the duration of sounding, enter:
siren n°
Factory setting: 90 s
4.3 Type of sounding
To modify the type of siren sounding, enter:
siren n°
Factory setting: external
4.4 Sound level of disarm and arm command indications
For greater user-friendliness, the sound level can be increased or decreased. To do this, enter:
siren n°
Factory setting: 4 = average
4.5 Transfer of arm and disarm commands
To modify the transfer of indications, enter:
siren n°
Factory setting: 0
4.6 Indication of audible signals and door bell
This function is factory-set to be disabled. It can be activated if required. To do this, enter:
siren n°
Factory setting: 0
4.7 Validation of radio link in installation mode
This function is used to validate the radio link test in installation mode on 1 of the 2 radio bands.
To switch to 2 bands, enter:
siren n°
Factory setting: 0
4.8 Triggering upon intrusion
The alarm is factory-set to be triggered as soon as an intrusion is detected. This function can be deactivated or activated for
intrusion confirmed indications only. To do this, enter:
siren n°
Factory setting: 1
from 20 to 180 s
0: internal
1: external
from 1 to 8
0: disabled
1: sounding
3: sounding and flashing
5: flashing
0: disabled
1: sounding
0: validation on 1 of the 2 bands
1: validation on 2 bands
0: disabled
1: single or confirmed intrusion
2: confirmed intrusion only
4.2.2 Level of sounding
To modify the level of sounding, enter:
siren n°
Factory setting: 0
4
0: normal
1: quiet