ansio 1308 Instructions et manuel d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Instructions et manuel d'utilisation pour {nom_de_la_catégorie} ansio 1308. ansio 1308 10 pages. Portable ptc ceramic heater
Imprimer la page
COMPONENTS OF THE HEATER
Power Light
Temperature
Control Knob
BEFORE USING THE HEATER
1. Check if the power cord is in good condition.
2. Ensure that the heater is connected to an appropriate power socket in accordance
with the local regulations.
3. Always place the heater on a flat surface. The tip over switch at the base of the
heater will turn the heater OFF if the heater is placed on an uneven/soft surface such
as carpet or if the heater is accidentally knocked off.
OPERATING THE HEATER
1. Insert the plug into the power socket.
2. Turn the Power selection knob clockwise to choose between one of the following
modes:
Fan only mode:
The fan in the heater is intended to assist with the circulation of hot
air and is not for the purpose of cooling the room.
Low Power Mode:
The heater operates at 1200 W.
High Power Mode:
The heater operates at 2000 W.
3. Turn the Temperature control knob clockwise to set the desired temperature.
Note: The temperature control knob acts as a thermostat. In the event of
overheating, the heater will be turned OFF automatically.
Customer Support - UK Toll Free 0800 080 6781 or +44 207 157 9795
ANSIO 1308 (M21v01)
Power Selection
Knob
Safety Grille
5