ansio 1321 Instructions et manuel d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Instructions et manuel d'utilisation pour {nom_de_la_catégorie} ansio 1321. ansio 1321 13 pages. Oil filled radiator heater
Imprimer la page
BEFORE MOVING THE HEATER
Before moving the heater, follow the instructions on "Turning the heater
OFF" as above and then move the heater to a desired place.
USING THE REMOTE CONTROL
The remote-control buttons operate the same way as the buttons on the
control panel.
FIRST TIME USE:
To activate the battery, remove the transparent
film by pulling it out. The remote control will
then be activated and ready for use.
REPLACING THE REMOTE WITH NEW BATTERY:
1. To pull out the battery holder tray, push the locking latch in the direction
of arrow (A), while pulling the notch in the direction of arrow (B)
simultaneously.
2. Insert 1 x CR2032 Lithium battery in the battery holder tray, making sure
that the positive side is facing upwards.
3. Push the battery holder tray back in.
NOTE: Remote-control buttons cannot be used for operations which
require two buttons to be used simultaneously. In these cases, use the
buttons on the control panel.
ANSIO 1321 (M20v01)
9