ansio 1321 Istruzioni e manuale operativo - Pagina 9

Sfoglia online o scarica il pdf Istruzioni e manuale operativo per Riscaldatore ansio 1321. ansio 1321 13. Oil filled radiator heater

BEFORE MOVING THE HEATER

Before moving the heater, follow the instructions on "Turning the heater

OFF" as above and then move the heater to a desired place.

USING THE REMOTE CONTROL

The remote-control buttons operate the same way as the buttons on the

control panel.

To activate the battery, remove the transparent

film by pulling it out. The remote control will

then be activated and ready for use.

REPLACING THE REMOTE WITH NEW BATTERY:

1. To pull out the battery holder tray, push the locking latch in the direction

of arrow (A), while pulling the notch in the direction of arrow (B)

simultaneously.

2. Insert 1 x CR2032 Lithium battery in the battery holder tray, making sure

that the positive side is facing upwards.

3. Push the battery holder tray back in.

NOTE: Remote-control buttons cannot be used for operations which

require two buttons to be used simultaneously. In these cases, use the

buttons on the control panel.

ANSIO 1321 (M20v01)