Anslut 411-075 Instructions pour l'utilisateur - Page 17
Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} Anslut 411-075. Anslut 411-075 19 pages. Passenger compartment heater
Rated voltage
Max. output
Power cord length
Dimensions
≥ 33 cm
Securely screw the attachment
in place using the screws provided.
Hook the heater into the attachment.
When installing the heater in a car, check the regulations and requirements for that particular
car. All installation work in a car must be performed professionally using products and materials
designed for cars. Check with a professional about the position of the heater to ensure it will not
obstruct an airbag, etc. or interfere with any other equipment in the vehicle.
TECHNICAL DATA
INSTALLATION
Place the appliance so as not to pose any risk of
injury in the event of a collision or hard braking.
The heater is designed to be secured to the floor
or side wall using the bracket provided. It is
important to leave a 33 cm clearance in front of
and above the heater to ensure a good flow of air.
≥ 33 cm
The attachment must not be fitted when the
heater is placed freely on the floor.
Can be fitted at a 90˚ or 45˚ angle
with the attachment.
220-240 VAC / 50 Hz
600 - 1250 W vid -25°C
1 m
175 x 90 x 145 mm
EN
17