Anslut 411-075 Gebruiksaanwijzing - Pagina 17

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Anslut 411-075. Anslut 411-075 19 pagina's. Passenger compartment heater

Rated voltage

Max. output

Power cord length

Dimensions

≥ 33 cm

Securely screw the attachment

in place using the screws provided.

Hook the heater into the attachment.

When installing the heater in a car, check the regulations and requirements for that particular

car. All installation work in a car must be performed professionally using products and materials

designed for cars. Check with a professional about the position of the heater to ensure it will not

obstruct an airbag, etc. or interfere with any other equipment in the vehicle.

TECHNICAL DATA

Place the appliance so as not to pose any risk of

injury in the event of a collision or hard braking.

The heater is designed to be secured to the floor

or side wall using the bracket provided. It is

important to leave a 33 cm clearance in front of

and above the heater to ensure a good flow of air.

≥ 33 cm

The attachment must not be fitted when the

heater is placed freely on the floor.

Can be fitted at a 90˚ or 45˚ angle

with the attachment.

220-240 VAC / 50 Hz

600 - 1250 W vid -25°C

1 m

175 x 90 x 145 mm