DSE DK-WP2 Manuel du propriétaire - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} DSE DK-WP2. DSE DK-WP2 4 pages. Camera and vcr in wall clock

Imprimer la page

OWNER'S MANUAL

reader for SD card (not supplied).

We must shut down the DVR with the A button, remove the micro SD card and insert it into an SD

card reader to the computer.

The device is detected in the computer's resources as a removable disk and behaves like a

common USB stick. Depending on your operating system you may start an automatic procedure,

or you'll have to explore your PC to find the new disc.

And 'possible to copy movies on your PC and play them back with any video player

(recommended VLC - VideoLAN).

E 'can play video files directly from the SD card, without copying them to your PC, but may affect

the sound quality and flow of play so it is recommended only to preview, and then download to

your PC the relevant files .

Connect the DVR to a monitor

The DVR is equipped with a video output to connect an analog monitor. IS'

minijack / RCA. You can connect a monitor with analog input or analog AV input of a TV. To

connect the monitor you must first take care to turn off the DVR with the button A. The LED will

flash 3 times quickly to confirm the shutdown. Then connect the monitor and press the button to

start the DVR.

The live camera image appears on the screen. the icons

overlay

unit.

In this condition you can also record you take pictures with the usual buttons.

programmable Options

Through the TV monitor connected to the video output of DVR you can access the OSD menu

that allows many programs. To open the OSD menu, press the remote control E (MENU button).

In the menu you can move with the arrow keys and the OK button.

provided the adapter cable

show

the

DSE srl - Digital Surveillance Equipment - www.dse.eu

DK-WP2 camera with VCR in wall clock

RESOLUTION - Set the recording resolution. The factory is set to 1080P (Full HD 1920x1080)

but you can also choose the resolution, 720P and 480P if you want to increase the video archive

ability. It 'also available in 720P resolution 60 f / sec to better capture even fast-moving images.

TIME STAMP - E 'can decide whether to superimpose the shooting date and time, only the date

or even nothing. LOOP RECORD - Defines how to act the DVR once filled the memory card.

Leaving this set to ON, the DVR will continue recording over the oldest files while choosing OFF

stop recording.

VIDEO TIME - Sets the duration of the video files in continuous recording (1-3-5 minutes) AUDIO

RECORD - Set whether or not to record audio along with the video EV - Adjusts the exposure by

plus or minus depending on shooting

MOTION DETECTION - Adjusts the sensitivity of the motion detection (3 levels)

SETUP - Here you set various general parameters

state

FORMAT - Format the SD card and delete all the data it contains. This step is not necessary to

record to the SD card.

LANGUAGE - Allows you to choose the menu language. TV OUTPUT - Selects the TV video

output format (NTSC or PAL in Europe)

LIGHT FREQ - Selects the video output frequency 50 / 60Hz

DATE FORMAT - Defines the date format. Normally in Italy DD / MM / YY

Document: DK-WP2-1I6

Page: 3