ATSI RMBC64-24D HAWK Manuel de l'opérateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} ATSI RMBC64-24D HAWK. ATSI RMBC64-24D HAWK 13 pages. Hawk 3 stage electronic battery charger

RMBC64-24D ELECTRONIC BATTERY CHARGER
Specifications
Power input (full charge single HAWK).
Power input (full charge two HAWKS)
Power input (trickle single HAWK)
Power input (trickle two HAWKS)
Charge time (flat to full)
Maximum time charger on trickle.
Weight.
Dimensions.
Battery charge state.
* Time between full charge operation.
* Time between full charge operation means that if the operator has fully charged the
battery, it can be left on trickle charge after the full charge cycle has been completed for
up to 48 hours.
A time period of one hour must be left before the full charge procedure is commenced to
allow the battery to cool down.
Do not start full charge procedure again immediately the battery has been fully
charged, as this could lead to the battery being permanently damaged.
NOT FOR OUTDOOR USE
240 volts AC @ 3.5 Amps.
240 volts AC @ 6,5 Amps
240 volts AC @ 0.5 Amps
240 volts AC @ 1 Amp.
5.5 hours.
48 hours
16.5Kgs.
200 x 380 x 570mm (H x W x D)
Any level from flat to full.
1 hour.