DSPPA MP120UB Manuel de démarrage rapide - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} DSPPA MP120UB. DSPPA MP120UB 3 pages. Mini digital mixer amplifier with usb/fm/bluetooth
Imprimer la page
Adjust the volume of MIC1, clockwise to turn up the volume, counterclockwise to turn down the volume.
9. MIC2/AUX2 volume adjustment
Adjust the volume of MIC2/AUX2, clockwise to turn up the volume, counterclockwise to turn down the volume.
10. AUX1 volume adjustment
Adjust the volume of AUX1, clockwise to turn up the volume, counterclockwise to turn down the volume.
11. Bass volume adjustment
Take the central position as the benchmark, counterclockwise to turn down the bass, clockwise to turn up the bass.
12. Treble volume adjustment
Take the central position as the benchmark, counterclockwise to turn down the treble, clockwise to turn up the treble.
13. Master volume adjustment
Adjust the level of all signals (except EMC signal on the rear panel), clockwise to turn up the volume, counterclockwise to
turn down the volume.
14. Power switch
Press "ON" to turn on the power, press "OFF" to turn off the power.
15. Level indicator
Audio output level display.
Rear Panel (Take MP120UB as an example)
1. Power input
Connect the power plug from this interface. Insert the plug into the machine, and then connect the power grid.
2. FM antenna interface
Connect the FM antenna to this interface.
3. DC power input
DC24V backup power input interface. (DC24V IN, only half power output for MP120UB)
4. Audio power output
Note: Any terminal of the power output cannot be connected to "Ground wire" directly or through other devices.
5. AUX output
6. AUX1 input port
7. AUX2 input port
8. Audio source selection switch (AUX2-MIC2) (Note:When you operate this switch, you need to turn the volume down or
turn off the device)
AUX2, MIC2/24V(MP35UB/60UB is 48V) phantom power switch, toggle the switch left and right to choose.
9. Indicator of phantom power (MP35UB/60UB is 48V, MP120UB is 24V)
10. MIC2 balanced input interface
11. AUX2/MIC2 volume control
12. 100V emergency signal input (When using external 100V emergency signal input, the ground wires of the two devices
can not be connected together.)
13. Emergency input volume control
14. General emergency signal input port
/
www.dsppatech.com
The specifications will be subject to change without prior notice.
Copyright © Guangzhou DSPPA Audio Co.,Ltd. All rights reserved.