DSPPA MP120UB 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} DSPPA MP120UB에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSPPA MP120UB 3 페이지. Mini digital mixer amplifier with usb/fm/bluetooth

Adjust the volume of MIC1, clockwise to turn up the volume, counterclockwise to turn down the volume.

9. MIC2/AUX2 volume adjustment

Adjust the volume of MIC2/AUX2, clockwise to turn up the volume, counterclockwise to turn down the volume.

10. AUX1 volume adjustment

Adjust the volume of AUX1, clockwise to turn up the volume, counterclockwise to turn down the volume.

11. Bass volume adjustment

Take the central position as the benchmark, counterclockwise to turn down the bass, clockwise to turn up the bass.

12. Treble volume adjustment

Take the central position as the benchmark, counterclockwise to turn down the treble, clockwise to turn up the treble.

13. Master volume adjustment

Adjust the level of all signals (except EMC signal on the rear panel), clockwise to turn up the volume, counterclockwise to

turn down the volume.

14. Power switch

Press "ON" to turn on the power, press "OFF" to turn off the power.

15. Level indicator

Audio output level display.

Rear Panel (Take MP120UB as an example)

1. Power input

Connect the power plug from this interface. Insert the plug into the machine, and then connect the power grid.

2. FM antenna interface

Connect the FM antenna to this interface.

3. DC power input

DC24V backup power input interface. (DC24V IN, only half power output for MP120UB)

4. Audio power output

Note: Any terminal of the power output cannot be connected to "Ground wire" directly or through other devices.

5. AUX output

6. AUX1 input port

7. AUX2 input port

8. Audio source selection switch (AUX2-MIC2) (Note:When you operate this switch, you need to turn the volume down or

turn off the device)

AUX2, MIC2/24V(MP35UB/60UB is 48V) phantom power switch, toggle the switch left and right to choose.

9. Indicator of phantom power (MP35UB/60UB is 48V, MP120UB is 24V)

10. MIC2 balanced input interface

11. AUX2/MIC2 volume control

12. 100V emergency signal input (When using external 100V emergency signal input, the ground wires of the two devices

can not be connected together.)

13. Emergency input volume control

14. General emergency signal input port

www.dsppatech.com

The specifications will be subject to change without prior notice.