Atten ST 80 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Atten ST 80. Atten ST 80 16 pages.
Imprimer la page(Figure 4),"SET" will show on LCD display panel simultaneously. Pressing and holding
adjust temperature quickly. Stop pressing will cause soldering sta�on store se�ng value
automa�cally and exit from temperature se�ng mode.
Figure 3
4. Storing and retrieving temperature values quickly
Retrieve temperature values: in normal working state, press 1, 2, 3(Figure 5) to retrieve
temperature values stored in memory and set retrieved value as current working temperature.
Store temperature: in normal working state, press and hold (over 3 seconds) 1, 2, 3 to store
current set temperature values into memory.
5. Locking opera�on keys
In normal working state, pressing and holding 1, 2, 3 simultaneously over 3 seconds can lock
current set temperature value. Now any opera�on on control panel will make no sense which
indicate opera�on keys is locked.
In key locking mode, pressing and holding 1, 2, 3 simultaneously over 3 seconds can remove
locking state as you want to.
6. System se�ng
6.1 As user need to set system parameters, user should enter system se�ng mode first. Press and
hold
and
simultaneously over 3 seconds to enter system se�ng mode. User can turn se�ng
pages by pressing
and
in system se�ng mode (Figure 7, 8, 9).
Figure 7
6
Figure 5
Figure 6
Figure 6
or
can
Figure 4
Figure 8