Atten ST 80 Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Atten ST 80. Atten ST 80 16 pagina's.
Pagina afdrukken(Figure 4),"SET" will show on LCD display panel simultaneously. Pressing and holding
adjust temperature quickly. Stop pressing will cause soldering sta�on store se�ng value
automa�cally and exit from temperature se�ng mode.
Figure 3
4. Storing and retrieving temperature values quickly
Retrieve temperature values: in normal working state, press 1, 2, 3(Figure 5) to retrieve
temperature values stored in memory and set retrieved value as current working temperature.
Store temperature: in normal working state, press and hold (over 3 seconds) 1, 2, 3 to store
current set temperature values into memory.
5. Locking opera�on keys
In normal working state, pressing and holding 1, 2, 3 simultaneously over 3 seconds can lock
current set temperature value. Now any opera�on on control panel will make no sense which
indicate opera�on keys is locked.
In key locking mode, pressing and holding 1, 2, 3 simultaneously over 3 seconds can remove
locking state as you want to.
6. System se�ng
6.1 As user need to set system parameters, user should enter system se�ng mode first. Press and
hold
and
simultaneously over 3 seconds to enter system se�ng mode. User can turn se�ng
pages by pressing
and
in system se�ng mode (Figure 7, 8, 9).
Figure 7
6
Figure 5
Figure 6
Figure 6
or
can
Figure 4
Figure 8