aTTo Digital RecLighter Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} aTTo Digital RecLighter. aTTo Digital RecLighter 7 pages.

don't need anymore the recorded files, you can choose to FORMAT the

drive and so you will very quickly erase all the files.

3. Please note that in recording mode, you do not need to remove the cap

of the RecLighter. The hole for the microphone is near the lanyard hole.

All you need to do is slide the button to ON and select a recording mode.

The recorder will automatically save the recording file after each four

hours of continuous recording, and then start to record next file.

Note: Each time you push the switch ON, the recorder starts a new

recording, which creates a new file.

If, for example, you switch it ON and OFF 3 times, the recorder will

create 3 recorded files corresponding to each time.

Note: You can rename these files just like any other computer file but

only after you copied the files on the PC. Do NOT edit the name of the

recordings directly on the built-in memory and DO NOT copy any other

files into RecLighter RECORD folder (any other files can be copied only

outside RECORD folder).

While recording, slide the "turn on/off" button to

Stop recording:

◆

"OFF" position(towards the recording mode button) - the blue-red

indicator light blinks one time. RecLighter will stop recording function

and save the recording files automatically.

◆Playback:

Make sure the device is OFF, then connect it to PC to

playback the audio files by going to " RECORD " folder and double click

on the file you want to listen. You can listen the footage with any audio

player; our recommendation is to use the free version of VLC Player or

BS Player;

Click here for the download link:

http://www.videolan.org/vlc/index.html

http://bsplayer.com/bsplayer-english/download.html

◆Charging:

Please connect the device to the PC or any USB plug to

charge it. When the indicator becomes red and keeps flashing, it means

the recorder is charging. When it finishes the charging process, the red

indicator light will stop flashing, remaining bright.

Once it has finished charging (typically just over 1 hour), you can eject

the device from the USB port. It can continuously work for about 27

hours once it's charged fully.