DTG M2 Manuel de remplacement

Parcourez en ligne ou téléchargez le pdf Manuel de remplacement pour {nom_de_la_catégorie} DTG M2. DTG M2 8 pages. Printhead cable replacement

M2 (PRINTHEAD CABLE REPLACEMENT)

(Always POWER DOWN printer and UNPLUG before doing any repair work)

PRINTHEAD CABLE REPLACEMENT:

1. Release carriage from capping station and roll out to middle of printer.

Place rag under the area you are working on.Just to catch any ink that might be dropped during

the install.

2. Release pressure off of the CMYK lines by loosening the caps on the ink bottles.

(Indicated on pg.2 Fig. 1-C)

3. Unscrew two thumscrews from carriage

Fig 1-A

Two "thumscrews" that hold the "RETAINER BAR" to the carriage.

Remove those screws in order to remove retaining bar.

Fig 1-B

Revision Date / Version: 2/13/2014 - 7

(Indicated below 1-A)

Carefully slide "RETAINER BAR" out

(Indicated below 1-A)

RETAINER BAR