dtm MICRO2 868 Manuel d'installation et d'assemblage - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'assemblage pour {nom_de_la_catégorie} dtm MICRO2 868. dtm MICRO2 868 12 pages. 2-channel radio receiver

Imprimer la page

2. RECEIVER PROGRAMMING

MICRO2 receiver has ability to program parameters of work. Before programing refer to Figure 2. showing view of mainboard,
programming buttonsC1 andC2 and LEDs location.
2.1 Adding remote to receiver memory
When receiver is on the working mode, press and hold programming button of chosen channelC1/C2. Red LEDC1/C2 lights on,
then press chosen remote button.Successful adding is indicated by LEDC1/C2 blinking.
1
PRESS AND HOLD
C1/C2 BUTTON
Fig. 3. Adding a remote.
2.2. Deleting remote from receiver memory
To delete remote from memory press and hold simultaneously receiver both C1 and C2 buttons. All LEDs blink, then press
any button of remote that you want to delete. Successful deleting is indicated by C1 LED blinking.
Pressing C1 and C2 buttons over 10 seconds will format receiver memory. (see section 2.12)
1
PRESS AND HOLD
C1 AND C2 BUTTONS
Fig. 4. Deleting a remote.
DTM System
spółka z ograniczoną odpowiedzialnością spółka komandytowa
2
C1/C2 LED LIGHTS
2
ALL LEDs BLINK
OUT, MOM, MONO, BIST
3
PRESS CHOSEN
BUTTON ON THE REMOTE
3
PRESS BUTTON OF REMOTE
YOU WANT TO DELETE
4
C1/C2 LED BLINKS
- ADDING SUCCESSFUL
4
C1 LED BLINKS
- DELETING SUCCESSFUL