AddEnergie SmartDC Manuel d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} AddEnergie SmartDC. AddEnergie SmartDC 15 pages. V2

Imprimer la page

Installing the Station onto the Base

Power cable access plate
1 . Remove the access plate to allow the passage of the power cable .
2 . Place the station onto its base, making sure to pass the power cable through the access hole .
3 . Punch a hole in the access plate of an appropriate diameter for the cable connector .
4 . Install the cable connector onto the access plate .
5 . Insert the power cable into the cable connector .
6 . Put the access plate back in place .
11
2017 ADDÉNERGIE TECHNOLOGIES INC. ALL RIGHTS RESERVED. Information and Specifications Contained in this Document are Subject to Change, Amendments, and Additions at any Time, Without Notice