AddEnergie SmartDC Panduan Instalasi - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pengisi Daya Baterai AddEnergie SmartDC. AddEnergie SmartDC 15 halaman. V2
Halaman CetakInstalling the Station onto the Base
Power cable access plate
1 . Remove the access plate to allow the passage of the power cable .
2 . Place the station onto its base, making sure to pass the power cable through the access hole .
3 . Punch a hole in the access plate of an appropriate diameter for the cable connector .
4 . Install the cable connector onto the access plate .
5 . Insert the power cable into the cable connector .
6 . Put the access plate back in place .
11
2017 ADDÉNERGIE TECHNOLOGIES INC. ALL RIGHTS RESERVED. Information and Specifications Contained in this Document are Subject to Change, Amendments, and Additions at any Time, Without Notice