daltile DAD2 Manuel d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} daltile DAD2. daltile DAD2 12 pages. Angular tile drill
Également pour daltile DAD2 : Manuel d'utilisation (12 pages)

Imprimer la page

CHECK BEFORE USE:

Unpacking:

●

Unpack the tile drill and check for

missing or damaged parts.

Power Supply:

●

Make sure that the power supply cor-

responds with the information on the

machine.

OPERATING PROCEDURES

Use the machine only in combination

●

with the supplied water tank

connection to the main water supply .

Always use the drill guide.

●

It is impossible to drill without a drill

guide. (see page 9). You can improvise a

drill guide using a piece of wood or

plastic. Make a V-shaped insertion like

illustrated and tape or clamp the guide

onto the tile in the desired position.

Always use the GFCI Switch.

●

PAGE 10 DALTOOL DAD2 OPERATING MANUAL V10/2007R1

OPERATING PROCEDURES

(9)

or direct

(8)

(11)

Mount the Drill Bit:

●

Prior to the installation of the diamond

●

bit it is important that both the machine

adapter and the diamond bit are cleaned

and greased.

Mount the bit with the flat side opposing

●

the locking screw.

Secure the bit using the socket head

●

screwdriver

(7)

Remove the socket head screwdriver.

●

Removal of the bit is done in reverse

●

order. After use dry and lubricate the bit

before putting it back into the original

packing.

Before changing tools always

unplug the machine

Water Supply:

●

When using the water tank (2): Fill the

●

water tank to the 1.3 gallon level and

pressurize by pumping at least 10 times.

Connect the water tank and the hose to

the drilling unit.