daltile DAD2 Manuel d'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} daltile DAD2. daltile DAD2 12 pages. Angular tile drill
Également pour daltile DAD2 : Manuel d'utilisation (12 pages)

Imprimer la page

Drilling:

●

Plug in the machine

●

Reset the GFCI Switch

●

Use the table below as a guideline to

●

select the RPM for your drill bit diameter

and start the machine. (note the these

may vary with the different materials you

are drilling)

Bit Diameter

1/4" - 3/8"

1/2" - 11/16"

3/4" - 1"

1 3/8" - 1 1/2"

1 3/4" - 2 5/8"

Open the Water Valve until a little water

●

comes out the drill.

You are now ready to drill

●

Ventilation openings in the

housing of the machine

The ventilation openings must be free

●

from objects such as Styrofoam, stone or

concrete debris. Remove these objects

before using the machine. If the ventila-

tion openings are not clear it will

mean that the cooling of the motor is

diminished and can damage the

machine.

There is a small hole in the water

●

injection head located behind the

connecting valve for the water hose.

When water comes out this small hole it

is recommended that you stop using the

machine and to contact your local

service center. Continuing to use the

machine can result in damage to your

machine

OPERATING PROCEDURES

(11)

Position

Pos. 4/5

Pos. 4

Pos. 3/4

Pos. 3

Pos. 2

REPAIR & MAINTENANCE

It is important that you do not push on

●

the drilling machine but let the machine

do the work.

When the drilling performance of the

●

machine starts to decline it is recom-

mended to dress the diamond bit using a

dressing stick (see also page 9).

If the bit locks during the drilling pro-

●

cess it is recommended to stop drilling

immediately so that the machine and the

tile are not damaged.

Take the drill out carefully by lifting it

straight up from the drilling hole and try

to start drilling again. Never have the

machine rotating when trying to take out

the drill. This can damage your machine.

Storage after Use

The machine should be kept in a dry

●

place and kept out of the reach of

children

Defects and Faults

Contact your DALTOOL Distributor for

●

repair work. They can direct you to a

service center.

DALTOOL DAD2 OPERATING MANUAL V10/2007R1 PAGE 11