DAN DRYER BJORK 3010 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DAN DRYER BJORK 3010. DAN DRYER BJORK 3010 10 pages.
Également pour DAN DRYER BJORK 3010 : Instructions de montage (2 pages)
Imprimer la page
ADJUSTMENT OF AIR SPEED AND TEMPERATURE
• Insert a flat notch through the hole in the bottom of the casing and place it in the
potentiomenter screw (see drawing below).
• Adjust the air speed and temperature by rotating the potentiomenter screw:
Clockwise to increase(+).
Counterclockwise to decrease (-).
Note: Do not overturn the adjustment!
SENSOR RANGE ADJUSTMENT
The sensor range is adjustable between 100mm og 230mm
Standard range 170mm ± 20mm
• Switch off the power, remove the (2) screws in the lower area, and remove the cover.
• Use a small Phillips screw driver or flat notch to adjust the sensoren on the VR-screw:
Clockwise: To increase sensor activation range (+)
Counterclockwise: To decrease sensor activation range (-)
• The sensor activation range should be adjusted to its environments,
e.g. light and distance to the bottom of the sink.
Note: Do not overturn the sensivity adjustment.
7