AnyFit PS05 Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} AnyFit PS05. AnyFit PS05 12 pages.

Imprimer la page

Step 3

1. Attach 2×Guiding Rod Cover (#27), 2×Guiding Rod(#33), 1×Top Plate(10)(#16),

1×Weight Plate(#76), 2×Buffer Pad of Weight Plate(#40), 2×Weight Support 50(#15),

2×Rubber Pad (#41) to Weight Frame Assembly(#1), using:

2×Flat Washer Φ11XΦ20X2(#70)

2×Socket Head Cap Bolt φ7.5×M10×45(#48)

2. Cross 1×CPS05 Steel Cable 1(#36) over 3×Pulleyφ89(#35), and attach to

Weight Frame Assembly(#1) and Moving Pulley Welding(#13),

then separately connect each side to Top Plate(10)(#16) and Grounded Frame

Assembly(#3), using:

3×Button Head Cap Bolt M10X45 S15(#59)

3×Nut M10(#74)

3. Cross 1×CPS05 Steel Cable 1(#37) over 2×Pulleyφ89(#35), and attach to

Main Frame Assembly(#2), over 1×Aluminum Pulleyφ89(#34) and attach to

Swing Frame Assembly(#10), then separately connect each side to

Moving Pulley Welding(#13) and Wheel Plate Frame(#6), and assembly

3×Short Steel Cable Sleeve, using:

1×Pulley Cover(#29)

1×Pulley Fixing Plate(#30)

3×Flat Washerφ11×φ20×2(#70)

6×Flat Washer Φ8.5×Φ16×1.5(#69)

1×Socket Head Cap Bolt M10X20（#61）

4. Attach 1×Magnetic Selection Pin（#31）to Weight Plate(#76)

Notice:

Fasten Bolts and Nuts According to Assembly Requirement.

This is the instructions of 145LBS, please assembly according to

the weight plate you bought.

2×Hex Nut M10(#73)

6×Flat Washer Φ11XΦ20X2(#70)

2×Button Head Cap Bolt M10X45 S15 (#59)

1×Button Head Cap Bolt M10×25（#56）

3×Button Head Cap Bolt M8X45 (#55)

3×Nut M8（#72）

Step 4

1. Attach 1×Spacer(#28) to Grounded Frame Assembly（#3）, using:

6×Flat Head Cap Screw M6X16（#50）

2. Attach 1×Adjustment Handle Frame（#7） to Right Leg Frame Assembly（#5）, using:

1×Hex Head Bolt M12X95（#65）

2×Flat Washer Φ13×Φ24×2（#71）

3. Attach 2×Leg Pad Fixing Rack Welding（#12）to Left Leg Frame Assembly（#4）

and Right Leg Frame Assembly（#5）separately, using:

2×Circlips for Shaft Φ25（#49）

4. Attach 2×Leg Pad(#44), 1×Tapered Buffer Pad(#38) to Leg Pad Fixing Rack

Welding（#12）separately, using:

3×Button Head Cap Bolt M10X30（#57） 3×Button Head Cap Bolt M10X45（#58）

3×Flat Washer φ11×φ20×2（#70）

1×Nut M12（#75）