Anyload PS805-B Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Anyload PS805-B. Anyload PS805-B 12 pages. Thermal receipt printer

Imprimer la page
8.3.1 Connect to 805TS/805BS Indicator or to a compatible weighing
indicator
For older models of 805TS & 805BS ( 805TS-B-16 / 805BS-B-16 & older ), use the
terminals 4, 5 & 6: 4=TXD, 5=RXD, 6=GND
SET THE FOLLOWING PARAMETERS OF 805BS / 805TS INDICATOR:
1.
2.
For the compatible weighing indicator, set the Baud Rate to 9600 and Mode of
Transmission to "Upon Request". Refer to the diagram above for the wirings.
The TXD signal from indicator goes to the RXD of the printer and the TXD signal
from printer goes to the RXD of indicator. Use the GND to complete the
connection.
10 |
ANYLOAD PS805-B Thermal Receipt Printer User's Manual (V1906)
FEMALE DB-9 CONNECTOR FROM
PS805-B PRINTER
1
-
2
TXD
3
RXD
SERIAL COMMUNICATION TERMINAL
BLOCK OF 805BS / 805TS INDICATORS
( 805TS-B-17 / 805BS-B-17 & later
models )
1
485-
2
485+
3
1GND
Note, use only the terminals 6 to 8 to connect
your RS232 printer
Baud Rate should be 9600
Mode of Transmission should be "Upon Request"
4
-
7
5
GND
8
6
-
9
4
1RXD
7
5
1TXD
8
6
2GND
-
-
-
2RXD
2TXD