Anyload PS805-B Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Anyload PS805-B. Anyload PS805-B 12 pages. Thermal receipt printer

Imprimer la page



Pull out some roll paper and press down the center of the printer cover

to close the cover



Tear off any excess paper in the direction of the side of the printer

Note:

* Use only high quality thermal paper roll with appropriate size

and within the specification.

* Roll paper that is too wide or too narrow might cause paper jam.

* Using low quality thermal paper roll might result a poor print out

and/or may reduce the life of the printer head.

* Don't press the FEED key when out of paper to prevent damaging

the printer head.

* Don't pull the paper out by hand.

* Close the top cover gently.

Maintenance

5.1 Cleaning the Printer Head

After using the printer for a long period of time, the print out might be faded or

not clear. The printer may require cleaning maintenance.

1. Make sure the power cord is unplugged and the interface cable is

disconnected.

2. Open the top cover and remove the paper roll from the printer.

3. Wait for 10 seconds to let the printer cool down.

4. Use a cotton swab, dip with alcohol and wipe the printer head gently.

4. Wait until the alcohol on the printer head completely evaporated, reload the

thermal paper roll, close the cover and reconnect all cables.

5. Check if the print out has improved.

6. Repeat the above steps if necessary. If the problem persists, contact your

technical support.

6 |

ANYLOAD PS805-B Thermal Receipt Printer User's Manual (V1906)