AnyLoadg P1 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AnyLoadg P1. AnyLoadg P1 8 pages. Weighing indicator

1.5 Battery

Scale

Battery Type

Trust Fire RCR123A

Lithium Battery

Charger

Lithium battery

Charge Time

8hours

(Approximately)

Work Time

24 hours

Charger

100~240VAC 50/60Hz

Power supply

1.6 Error Message

Err 05

Wireless communication is abnormal, check the antenna and the power

supply of both indicator and the scale.

--OV--

Overload, if there is not weight on the scale, the wire connection

between the load cell and the wireless module.

dC LL

Indicator low battery, please recharge the indicator with NC1056

recharger.

L ----

Scale low battery, please recharge the scale battery with lithium battery

charger.

1.7 Installation Of The Scale

Unscrew the battery cap, replace the flat batteries with the fresh ones, make

sure the batteries are installed properly before tightening the battery cap. The

negative of the battery is facing the battery cap.

The scale body will turn off after one hour without operation. If you want to use

again, please turn it off before turn it on again.

Indicator

7.2V 2800mAH Ni-MH

battery

NC1056

4 hours

40 hours (without backlight)

100~240VAC 50/60Hz

> D

^ t> W