Dudley Wave S3 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dudley Wave S3. Dudley Wave S3 8 pages. Smart flush actuator

Flush Boost

If the ush test carried out in Section 3 failed on either or both ush options

a Boost can be independently applied to deliver more air to the valve.

Step 1

Press any rear button once to enter Boost Mode.

The current boost setting will now be displayed for both full and partial ush.

Step 2

Toggle Boost ON and OFF for full and partial

ush using the rear buttons.

Step 3

To store Boost settings wait 5 seconds until

the icons return to blue.

O R

Fill Delay

This sets the delay period between consecutive ushes to allow the cistern to

rell. This can be set at a range of time periods between 15 and 120 seconds

which are visible on the ll delay dial.

Step 1

Measure the ll time after several

full ushes and record an average.

Step 2

Using a at-ended screwdriver

rotate the ll delay dial to a

duration suitable to the time

previously recorded.

FULL

OFF

PARTIAL