Anywire ASLINKAMP LB-F1011 Manuel du produit - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} Anywire ASLINKAMP LB-F1011. Anywire ASLINKAMP LB-F1011 11 pages. Fiber amplifier
Également pour Anywire ASLINKAMP LB-F1011 : Manuel du produit (11 pages)

Imprimer la page

[Speci cations]

■General Speci cations

Ambient temperature/humidity for use

Ambient temperature/humidity for storage

Atmosphere for use

Altitude of use *

Pollution level *

*1 When expanding with 1 to 2 extension units: 0 - 55°C

When expanding with 3 to 10 extension units: 0 - 50°C

When expanding with 11 or more extension units: 0 - 45°C

*2 Do not use or store the AnyWireASLINK device in an environment pressurized equal to

or higher than the atmospheric pressure at the altitude of 0m. Doing so could cause a

malfunction.

*3 Index that indicates the occurrence of conductive material in the environment where the

device is used.

Contamination level 2 indicates that only non-conductive contamination occurs.

However, incidental condensation could create temporary conductivity in this

environment.

■Transmission speci cations

Power supply

Voltage 24V DC +15% to -10% (21.6 to 27.6V DC)

voltage for use

Ripple of 0.5Vp-p max.

Transmission method

DC power supply superimposed total frame/cyclic method

Synchronization method

Frame/bit synchronization method

Transmission procedure

Dedicated protocol

Connection mode

Bus type (Multi-drop method, T-branch method, Tree branch method)

Number of connection points

512 max. (IN: 256, OUT: 256)

Number of units connected

Up to 128 units

RAS feature

Transmission line disconnection, transmission line

short-circuit, transmission power supply reduction

detection ID redundancy, ID not set

■Individual speci cations

Number of occupied points

Response time *

Consumption current

Mass

Protective structure

Ambient illuminance for use

*4: Time from when ON or OFF is detected until the transmission signal is transmitted.

For the data to change, this time + 1 transmission cycle time is required.

[Detection distance]

■Fiber head (AnyWire dedicated head)

Type

Transmission type

AFT-4 (M4, R30)

Transmission type

AFT-1 (M3, R20)

Transmission type

AFT-2 (M3, R25)

Transmission type

AFT-1-1 (100°C, M3, R20)

* "Diagnosis" refers to the amplifier's monitoring and notification functions, such as

"sensor level reduction" and "transmission signal level reduction."

0 - 55°C *

, 10 - 90%RH (No condensation)

-25 - 75°C, 10 - 90%RH (No condensation)

No corrosive gas

0 to 2000m

2 or less

One-point input

1 - 2 cycles

24V-0V

25mA

DP-DN

1.9mA

21g (Base unit)

17g (Extension unit)

IP40

Incandescent lamp

3000 lx or less

Sunlight

10000 lx or less

Detection distance (mm)

Model name

With

diagnosis*

410

160

300

170

[Outside Dimensions]

■LA-F1011 (Base unit)

■Transmission line

■LB-F1011 (Extension unit)

Without

diagnosis*

600

210

420

240

-L*F1011 10/11-

Φ1.1

Φ4.1

Four cores, AWG24

Cable length: Approx. 200mm

Unit: mm

36.7