Addi-Data MSX-E3311 Installation rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Installation rapide pour {nom_de_la_catégorie} Addi-Data MSX-E3311. Addi-Data MSX-E3311 8 pages. Ethernet system for pressure and force measurement

Imprimer la page

Connecting the Ethernet system

- Please read the safety precautions (yellow leaflet) first!

- Afterwards, connect your Ethernet system as follows:

A) Connect the Ethernet system to your PC or network using an Ethernet cable

(e.g. CMX-60).

B) Connect the desired functions.

C) Optional: Connect the cable for trigger/synchro signals (e.g. CMX-40) to the Ethernet

system.

NOTICE!

Please ensure that the default IP address of the Ethernet system

(192.168.99.99) is not assigned to another system on your network yet.

Starting the Ethernet system

D) Connect the Ethernet system to the power source using a power supply cable

(e.g. CMX-20).

E) Check the status of the Ethernet system by means of the LED display:

Power On:

Port 0 ACT/Link: - flashes yellow

Port 1 ACT/Link: - flashes yellow

Status:

As soon as the "Status" LED lights green, you can install the software (see page 5).

(A)

Ethernet

ports

(C)

Trigger/

Synchro

(D)

Power

supply

- lights green

- lights yellow

- lights/flashes red

(E) LED display

Intelligent

Pressure

System

CH0-CH1

CH8-CH9

CMX-20: Power supply cable

= Power supply is OK

= Ethernet cable is connected to Port 0

= Ethernet cable is connected to Port 1

= Ethernet system is ready for operation

= Ethernet system is booting

= Error while booting

(B) Sensor inputs (0 to 15)

CH2-CH3

CH10-CH11

CH4-CH5

CH6-CH7

CH12-CH13

CH14-CH15