Addi-Data MSX-E3311 Быстрая установка - Страница 2
Просмотреть онлайн или скачать pdf Быстрая установка для Измерительные приборы Addi-Data MSX-E3311. Addi-Data MSX-E3311 8 страниц. Ethernet system for pressure and force measurement
Печатать страницу
Connecting the Ethernet system
- Please read the safety precautions (yellow leaflet) first!
- Afterwards, connect your Ethernet system as follows:
A) Connect the Ethernet system to your PC or network using an Ethernet cable
(e.g. CMX-60).
B) Connect the desired functions.
C) Optional: Connect the cable for trigger/synchro signals (e.g. CMX-40) to the Ethernet
system.
NOTICE!
Please ensure that the default IP address of the Ethernet system
(192.168.99.99) is not assigned to another system on your network yet.
Starting the Ethernet system
D) Connect the Ethernet system to the power source using a power supply cable
(e.g. CMX-20).
E) Check the status of the Ethernet system by means of the LED display:
Power On:
Port 0 ACT/Link: - flashes yellow
Port 1 ACT/Link: - flashes yellow
Status:
As soon as the "Status" LED lights green, you can install the software (see page 5).
(A)
Ethernet
ports
(C)
Trigger/
Synchro
(D)
Power
supply
2
- lights green
- lights green
- lights yellow
- lights/flashes red
(E) LED display
Intelligent
Pressure
System
CH0-CH1
CH8-CH9
CMX-20: Power supply cable
= Power supply is OK
= Ethernet cable is connected to Port 0
= Ethernet cable is connected to Port 1
= Ethernet system is ready for operation
= Ethernet system is booting
= Error while booting
(B) Sensor inputs (0 to 15)
CH2-CH3
CH10-CH11
CH4-CH5
CH6-CH7
CH12-CH13
CH14-CH15
www.addi-data.com